|
Model: PA-2020 6 Polyamide Rods
Features: Dia. 8mm ~ 200mm
Color: Translucent Milky Color
6 Nylon Rods is the other hugely popular grade that does posses some
advantages over 6 Nylon Rods, notably there is a small cost advantage and also
there is a size range advantage particularly in the higher end of the
spectrum. Nylon 6 is also the most popular grade throughout the rest of
Europe. 6 Nylon Rods is made in the two different processes, cast and
extruded. Cast 6 Nylon bar is produced by carefully heating the polymer and
pouring in to moulds and then allowed to cure in special ovens to allow any
trapped air bubbles to escape. This process provides a Nylon bars that is
very stable and because it is allowed to naturally form, it can produce a
lower stressed product. The other manufacturing process is the extrusion
method which produces a Nylon bar that is economical and available in
longer lengths than the cast method. The Nylon 6 extruded size range is
similar to the Nylon 66 as the extrusion process limits the high end
sizes.
|
